Melting Capacity 50TPD, End Fired Furnace, For Glass Production Line
1. Brief Description
The end fired furnace is named by the longitudinal arrangement of the burner port and the U shape of flame combustion route. At present, the end fired furnace is more widely used in the glass industry.
The melting process is divided into five stages as following, each section has its inner connection, affecting each other. If one stage has imperfect performance, it will influence the next stage, and ultimately affect the quality of glass.
Glass melting is the most important process in glass production, it is a forming process where the batched materials form a qualified liquid evenly with no bubbles under high temperature heating.
Glass melting is a very complex process, it includes physical, chemical and physicochemical phenomena and reaction. These phenomena and reaction lead the mechanical mixed raw materials to complex melting glass liquid.
2. Advantage
| 1 |
Long Flame |
| 2 |
High efficiency of heat utilization |
| 3 |
Low energy consumption |
| 4 |
Lower investment |
| 5 |
Smal foot print |
3. Factors that influence the melting effects
| 1 |
Characteristic of raw materials |
| 2 |
Chemical compon |
| 3 |
Material feeding method |
| 4 |
Melting temperature |
4. Main sections of furnace
Normally, the semidiameter of working tank is equal to the width of the melting tank, the depth of the working tank is less than 300mm-400mm of the melting tank.
Normally, the temperature of the dog house is about 1100°C~1400°C. The batched materials will be pre-melted at this section.
It is the place where the fuel is mixed with the preheated air, also an access for the preheated air in to the furnace and exhausting the waste gas out.
Flame space is a space which is combined with breast wall, crown, and front and back gable wall.
Throat is a core section of the furnace, it will affect the quality of glass and furnace campaign.
The regenerator can heat the combustion air by exhausted gas coming out from the furnace with the help of checker brick.
5. FAQ
Q: Who we are?
A: JEFFER Engineering and Technology Co., Ltd is a professional engineering company specialising in project design, engineering technology consulting, engineering, procurement, construction (EPC), and project operation management.
Q:Can you offer design service?
A: Yes, we could design full solution drawings as per your requirements.
Q: Do you offer installation on site overseas?
A:Yes, we can provide our engineer to supervise the installation work on site or provide the the whole installation team on site to finish the project.
Product Tags:
|
|
150TPD End Fired Furnace Mild Steel Glass Melting Images
|
